I’m a consumer
AirFit F30i features

1. Quick-release elbow is designed for easy connection and disconnection of the mask from tubing, plus 360o rotation, allows for freedom of movement.

2. Top-of-head tube design gives users the freedom to sleep the way they want.

3. Flexible conduit frame allows therapy air to flow through the elbow and into the frame and cushion.

4. UltraCompact full face cushion rests under the nose to deliver all-round stability, visual freedom, and minimal facial contact.

5. Magnetic clips make it quick and easy to connect the headgear to the frame.

Support

Supporting you
Supporting patients
Swipe

Sizing Cushion

  1. Familiarise yourself with the cushion-sizing template provided and the cushion sizes available.
  2. Hold the sizing template under the patient's nose, and use it to determine the most suitable cushion size. Ideally, the outer edge of the patient's nose should sit on the grey band in the centre of the coloured margins. 
  3. Select the matching cushion and try it on your patient for comfort and fit.

Sizing Frame

  1. Use the frame-sizing template provided as a guide to help you choose the correct frame.
  2. If the mask frame falls back over the patient's head or sits too close to their ears, it is too large. Try a smaller frame.
  3. If the mask frame falls forward over the patient's head or sits too close to their eyes, it is too small. Try a larger frame.
  4. A well sized frame will sit centred on the patient's head, and is neither too close to the eyes or ears.

Fitting

  1. Connect the air tubing from the CPAP machine to the mask elbow.
  2. Take the elbow out of the frame by squeezing the quick-release buttons and pulling up.
  3. Ensure the magnetic clips are not connected to the frame. Twist and pull them away from the frame if they are.
  4. Place the cushion under the patient's nose, and pull the headgear and frame over their head.
  5. Bring the lower headgear straps under the patient's ears, and attach the magnetic clips to the frame on both sides.
  6. Unfasten the upper headgear straps, and pull them evenly until the mask is secure and comfortable.
  7. Unfasten the lower headgear straps, and pull them evenly until the mask is secure and comfortable.
  8. Reattach the elbow with the air tubing to the frame.

Mask Inspection

Regular inspection of your mask is essential to ensure it is working correctly. If any damage is found, the mask component should be replaced.

  1. Examine the mask system and become familiar with its components.
  2. Follow the user guide instructions to disassemble the mask.
  3. Examine the headgear for signs of wear, tear and damage.
  4. Examine the frame for signs of wear, tear and damage.
  5. Examine the cushion for signs of wear, tear and damage.
  6. Examine the elbow for signs of wear, tear and damage.

Managing leak

If air is escaping the mask cushion from any area other than the vent, try the following steps to locate and stop the leak.

  1. If any air is escaping from different areas of the cushion, try pulling it away from your patient's face and letting it reseal itself.
  2. If your patient feels air is escaping from the top half of the cushion, try adjusting the upper headgear straps until there is a secure seal. 
  3. Ensure the frame is centred on the patient's head and the air tubing is not pulling on their mask.

Daily Cleaning

  1. Follow the mask disassembly instructions to disconnect the mask cushion.
  2. Soak the cushion in warm water and a mild liquid detergent.
  3. Hand wash the cushion inside and out with a soft bristle brush. Pay particular attention to cleaning the vent holes.
  4. Rinse the cushion under running tap water.
  5. Leave the cushion to air dry away from direct sunlight.

Weekly Cleaning

  1. Follow the mask disassembly instructions to disconnect the mask headgear, frame and elbow.
  2. Soak each of the components in warm water and a mild liquid detergent.
  3. Hand wash each of the components. You can use a soft bristle brush to scrub the frame and elbow. Pay particular attention to cleaning the vent holes.
  4. Rinse each of the components under running tap water.
  5. Leave each of the cleaned components to air dry away from direct sunlight.

Assembly

  1. Ensure you have all the mask components and parts together.
  2. Insert each of the frame connectors into the cushion until they click into place.
  3. Connect the elbow to the top of the frame until it clicks into place.
  4. Hold the headgear so that the ResMed logo is upright and facing towards you.
  5. Insert each of the upper headgear straps into the frame, and fold the fastening tabs over to secure.
  6. If the elbow ring detaches from the frame, slide it back into the opening with the widest part of the rim facing downwards.

Disassembly

  1. Ensure the mask is not connected to any CPAP machine.
  2. Unfasten the upper headgear straps, and pull them out from the frame.
  3. Squeeze the quick-release buttons on the elbow, and pull up to detach it from the frame.
  4. Life and unclip each of the frame connectors to detach the frame from the cushion.
Sizing and fitting

The AirFit F30i comes in 5 saleable stock keeping units (SKUs) to cover the majority of the customer population. These SKUs include S/SML, S/STD, M/STD, W/STD and M/LGE. Each SKU comes with one mask system that includes the frame, cushion, headgear and elbow. The cushion fitting template and frame fitting guide is available to download so that customers can be sized with the AirFit F30i correctly.

30 day money back guarantee

We're so sure that your customers will love our AirFit F30i full face mask, that we are offering a 30 day money back guarantee if they are not completely satisfied. Terms and conditions apply.

Download the: - Partner instructions - Patient Terms & Conditions - Returns form

Marketing materials

The following marketing materials are available to order from the ResMed Marketing Hub.

B2B

AirFit F30i Combined Product Guide

Mask Portfolio A4 Information Sheet

AirFit F30i Product A2 Poster

B2C

AirFit F30i Consumer Fact Sheet (digital only)

Full Face Mask Consumer DL Brochure

ResMed Mask Portfolio Consumer Selection A2 Poster

Full Face Mask Consumer DL Brochure

Authorised Dealer assets

To access and order the AirFit F30i co-branded marketing and digital assets, please login to theResMed Marketing Hub with your request.

Get started today with these tools to market the AirFit F30i to your customers!

Note: The ResMed Marketing Hub is only available to ResMed Australian Authorised Dealers (RAD). Not a RAD? Please contact your local ResMed Business Manager to find out how you can become a RAD today.