1. Knowledge Base
  2. CPAP Product Tips
  3. AirFit F20/ For Her full face mask

How do I get the right fit on my AirFit F20 (or For Her) full face mask?

1031808 AirFit F20 Vid Fitting Glo
  1. Unclip the EasyClick Magnets.
  2. With the mask held against your face, pull the headgear over your head. Ensure the top of the mask cushion is sitting comfortably at the top of your nasal bridge. The bottom of your headgear should settle comfortably at the top of your neck - with the top of the headgear sitting on your crown.
  3. Bring each of the magnets up to meet their corresponding clips on the frame.
  4. Adjust the tabs on the upper headgear straps.
  5. Adjust the tabs on the lower headgear straps.
  6. Connect your device tubing to your mask elbow
  7. Connect the elbow to your mask.
  8. To ensure your fit will work with your therapy: switch on your device and position yourself as if you are to begin therapy (e.g. lying down in bed).
  9. Adjust your upper straps.
  10. Adjust your lower straps.
  11. Do not overtighten as this may cause discomfort.
  12. Practice resetting your cushion – pull your mask away from your face, allow your cushion to reinflate, and then resettle the inflated cushion so the cushion membrane is sitting at the top of your nasal bridge.

These instructions are for general information purpose only. For full details consult the user guide.