1. Knowledge Base
  2. CPAP Product Tips
  3. AirFit P10 for AirMini nasal pillows mask

Any tips on managing mask leak with the AirFit P10 (for AirMini) nasal pillows mask?

1032276  AirFit P10 for AirMini Vid Mng leak GLO ENG
  1. While therapy is running, place your fingers around the upper and lower areas, where the mask seals to the face, to check if air is escaping.
  2. If there are leaks, try adjusting the headgear to help with mask fit. Simply spread them apart to loosen and draw them together to tighten.
  3. You can also readjust the pillows by pulling briefly on the mask away from your nose to reset them.
  4. Once the mask is secure and comfortable, you’re ready to start therapy.

Note: When the device is running, a light breeze should be felt at the base of the vent module, but there should be no other areas of air leak. If leak occurs or continues, try refitting the cushion into the frame.

These instructions are for general information purpose only. For full details consult the user guide.